Ronseal Ultimate Finish Decking Replacement Pads

Before you start, unbox and assemble your kit - this won't take long! Clip the soft-grip handle into the pad head and set the angle using the black button slider. Each section of the 5-piece extension pole slots into the next and is locked by twisting clockwise. Screw the pole into the soft-grip handle and attach the best pad for the job you are about to do (TIP: it's a good idea to clean the deck before you coat it and leave a couple of days for it to properly dry).

The blue cleaning pad works perfectly with Ronseal Decking Cleaner & Reviver. Pour the cleaner directly onto the deck and use the Decking Pad Kit with the cleaning pad attached to scrub the deck clean. Make sure you leave about 48 hours after cleaning before you apply new coatings.

To oil, stain or paint your decking us the green application pad. Pour your oil, stain or paint into a tray and dip the pad in. Be careful not to completely submerge the pad, aim to dip no higher than the white foam part of the pad. On the first coat of your oil, stain or paint, push down firmly while you apply - this will help the pad follow the grooves of your decking. For the second coat, you won't need to push as firmly and the Decking Pad Kit will give a nice streak-free finish. Both of the pads included with this kit can be cleaned and reused. Make sure you clean them out straight after use with warm, soapy water.